Description
VIAIR Corporation – Ultra Duty Onboard Air System
VIAIR’s Ultra Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 480C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size. For up to 37″ tires.
Specifications:
– 12-Volt
– 1.76 CFM
– Permanent Magnetic Motor
– Duty Cycle: 100% @ 100 PSI
– Max. Working Pressure: 200 PSI
– Max. Amp Draw: 23 Amps
– Ingress Protection Rating: IP67
Features:
– 2.5 Gallon 200 PSI VIAIR Air Tank
– 480C Chrome VIAIR Air Compressor
– Tire Inflation Gun with 200 PSI Gauge
– Dash Panel Gauge with ON/OFF Switch
– 30ft. Coil Hose with Quick Connects
– Pressure Switch (165 PSI on, 200 PSI off)
– Reducer: 1/8” (F) to 1/4” (M)
– Reducer: 3/8” (F) to 1/4” (M)
– 1/4” Quick Connect Stud (F)
– 1/4” Quick Connect Coupler (F)
– 1/4” 250 PSI Safety Valve
– 1/4” Drain Cock
– (3) 1/4” Compression Fittings
– 20ft. 12-Gauge Wire with Inline Fuse Holder
– 4” Strip of Continuous Grommet Material
– Accessory Airline
– Electrical Connections
Fill Rates:
– 2.5 GALLON TANK
0 to 200 PSI – 5 min. 02 sec. (± 10 sec.)
165 to 200 PSI – 1 min. 30 sec. (± 05 sec.)
– 35″ X 12.5″ TIRE
0 to 30 PSI – 6 min. 15 sec. (± 15 sec.)
15 to 30 PSI – 3 min. 15 sec. (± 10 sec.)
– 37″ X 12.5″ TIRE
0 to 30 PSI – 7 min. 00 sec. (± 15 sec.)
15 to 30 PSI – 3 min. 40 sec. (± 10 sec.)
NOTE: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.
Explore more from our collection.
Reviews
There are no reviews yet.